Steel Tubes
1
Dec/080
Dec/080
Steel Tubes
| Shop->Sports and Outdoors->Sport and Outdoor | ||||
|
Groove Tubes G11COM202 BMX Bike from $ 279.95 Cut from the same cloth as the Performer, The Compe picks up where the Performer leaves off. Same mission. Same frame design. Same geometry. Different tubing. Stock Status : In 1 Stores 
|
|||
|
Westin 22-5065 61.5" Black Oval Tube Step from $ 142.44 Westin universal oval tube steps step pads sit snug on the tube body with a higher and more robust apperance. They have capped ends for a finished look and offer a hidden track mounting system on which a C- coupling bracket plate slides along the underside track increases its usage and creates a universal application. It comes in polished stainless steel or black E-coated mild steel. Stock Status : In 11 Stores
|
|||
|
Zeagle QD Deluxe Signal Tube - 3" 65' Reel with E-Z Mount Pouch from $ 134.95 QD Deluxe Signal Tubes The Quick Deploy Deluxe Signal System is a compact way to effectively store and deploy a signal tube and a thumb reel. The System includes the Signal Tube, the Reel and line, double ended Brass Snap and an E-Z mount Pouch. 730-3001P - With lightweight 3.25 Thumb Reel, 115 feet of HD nylon line, double ended brass snap and E-Z Mount pouch. Also available as a zip-on pouch (730-3001PZ). 730-3001S - With Stainless Steel 3 Thumb Reel, 65 feet of HD nylon line, double ended brass snap and E-Z mount pouch. Also available as zip-on pouch (730-3001SZ). The Quick Deploy Deluxe Signal System is completely enclosed in the pouch when not in use. To deploy, the diver grasps the Deploy Strap and pulls the reel and the signal tube out of the pouch. The diver inflates the Signal Tube with his Octopus 2nd stage by purging air out of the regs mouthpiece into the large one-way valve on the bottom of the tube (if available) or by orally inflating the oral inflator valve. Stock Status : In 3 Stores
|
|||
|
Westin 22-5005 53" Black Oval Tube Step from $ 131.00 Westin universal oval tube steps step pads sit snug on the tube body with a higher and more robust apperance. They have capped ends for a finished look and offer a hidden track mounting system on which a C- coupling bracket plate slides along the underside track increases its usage and creates a universal application. It comes in polished stainless steel or black E-coated mild steel. Stock Status : In 11 Stores
|
|||
|
Zeagle QD Deluxe Signal Tube - 3" 65' Reel with E-Z Zip-on Pouch from $ 139.95 eagle Quick Deploy Deluxe Signal Tube with SS Thumb Reel And Zippered Pouch The Zeagle SMB Quick Deploy Deluxe Signal System also known as a SMB or Signal Marker Buoy, is a compact way to effectively store and deploy a Signal Tube. The Zeagle SMB Quick Deploy Deluxe Signal System has brass Snap and an E-Z mount Pouch The System includes the Signal Tube, Stainless Steel Thumb Reel with 65' of Heavy Duty High Visibility Line, and pouch. Stock Status : In 2 Stores
|
|||
|
Fishing: Hmh Starter Tube Fly Tool
USD 29.99 Clamp into any vise that accepts a 2/0 hook to tie tube flies with ease. Comes with two stainless steel pins to fit all tubes. Instructions included. Made in USA. Sports and Outdoors > Sport and Outdoor 
Notes : Stock Status : in-stock
|
|||
|
Fly High Pro X Deluxe Tower Boom, fits 1-7/8" - 2" dia. tube
USD 699.99 One of the best training tools for learning to wakeboard, ski, slalom, or barefoot, the Tower Boom converts any family inboard or sterndrive boat into the ultimate watersports tow boat. An adjustable clamp and two arms attach to the tower, while two plastic-covered stainless steel cables secure the Tower Boom to the boats bow eye for maximum strength and support. Manufactured from top-quality 6061 T6 aluminum, the Tower Boom is designed to fit 1-7/8" to 2" diameter towers and cages. Offers a height adjustment to fit everyone.
Notes : Stock Status : in-stock
|
|||
|
Lasdrop Shaft Seals 1 1/2" Gen Ii Shaft Seals Seal, 1/2", Stern Tube:
USD 409.99 Lasdrop Shaft Seals 1 1/2" Gen Ii Seal, 1/2", Stern Tube: . The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. The Gen II uses a 316-marine grade stainless steel spring to provide pressure to the seal surfaces. Together, the spring and seal ring rotate along with the shaft, and remain secured in the Clamp/Pressure housing. Because there's virtually no metal-to-metal contact, you eliminate the risk of electrolysis. The Gen II is available for shaft sizes 1" 4," accommodating stern tube sizes of up to 8" OD. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews. The 316 stainless steel seal ring floats on a ball bearing drive system, maintaining complete contact with the carbon graphite seal surface. Solid brass hose barbs. AWAB hose clamps are 316 stainless steel, manufactured with indentations rather than perforations, providing twice the tensile strength and eliminating friction as in regular clamps. Click here for a list of Lasdrop's sizes and here for Lasdrop's Installation Instructions.
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
|
Portable Discus Cage Deluxe Model Track & Field BLACK NET 1-1/4" STEEL TUBE
USD 1159.79 Portable Discus Cage Deluxe Model Track & Field Description: Protection, ease of use, compliance and price! TC Sports offers the best portable discus cage on the market which complies with the National Federation of State High School Associations Specifications. Rear entrance and exit provides for a safe, yet fast, means of keeping the event moving. Constructed of a 1-1/4" heavy gauge galvanized steel tube which will provide the necessary protection for both athlete and spectator. May be disassembled for convenient storage and is sold with a treated net for long wear. Net is made of heavy duty 1-3/4" sq 4mm mesh netting, with a 250# break strength, and treated black. Nets are complete with grommets and heavy duty nylon cord to attach securely to frame. Pads provide additional protection. *THIS IS A SPECIAL ORDER AND TAKES 4-6 WEEKS* Please contact Epic Sports if you have any questions.
Notes : Stock Status : in-stock
|
|||
|
Lasdrop Shaft Seals 1 1/4" Gen Ii Shaft Seals Seal, Stern Tube: 2 5/8"
USD 359.99 Lasdrop Shaft Seals 1 1/4" Gen Ii Seal, Stern Tube: 2 5/8" . The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. The Gen II uses a 316-marine grade stainless steel spring to provide pressure to the seal surfaces. Together, the spring and seal ring rotate along with the shaft, and remain secured in the Clamp/Pressure housing. Because there's virtually no metal-to-metal contact, you eliminate the risk of electrolysis. The Gen II is available for shaft sizes 1" 4," accommodating stern tube sizes of up to 8" OD. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews. The 316 stainless steel seal ring floats on a ball bearing drive system, maintaining complete contact with the carbon graphite seal surface. Solid brass hose barbs. AWAB hose clamps are 316 stainless steel, manufactured with indentations rather than perforations, providing twice the tensile strength and eliminating friction as in regular clamps. Click here for a list of Lasdrop's sizes and here for Lasdrop's Installation Instructions.
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
|
Fly High Pro X Deluxe Tower Boom, fits 2-1/4" - 2-1/2" dia. tube
USD 699.99 One of the best training tools for learning to wakeboard, ski, slalom, or barefoot, the Tower Boom converts any family inboard or sterndrive boat into the ultimate watersports tow boat. An adjustable clamp and two arms attach to the tower, while two plastic-covered stainless steel cables secure the Tower Boom to the boats bow eye for maximum strength and support. Manufactured from top-quality 6061 T6 aluminum, the Tower Boom is designed to fit 2-1/4" to 2-1/2" diameter towers and cages. Offers a height adjustment to fit everyone.
Notes : Stock Status : in-stock
|
|||
|
Lasdrop Shaft Seals 3" Gen Ii Shaft Seals Seal, Stern Tube: 5 1/2"
USD 1079.00 Lasdrop Shaft Seals 3" Gen Ii Seal, Stern Tube: 5 1/2" . The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. The Gen II uses a 316-marine grade stainless steel spring to provide pressure to the seal surfaces. Together, the spring and seal ring rotate along with the shaft, and remain secured in the Clamp/Pressure housing. Because there's virtually no metal-to-metal contact, you eliminate the risk of electrolysis. The Gen II is available for shaft sizes 1" 4," accommodating stern tube sizes of up to 8" OD. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews. The 316 stainless steel seal ring floats on a ball bearing drive system, maintaining complete contact with the carbon graphite seal surface. Solid brass hose barbs. AWAB hose clamps are 316 stainless steel, manufactured with indentations rather than perforations, providing twice the tensile strength and eliminating friction as in regular clamps. Click here for a list of Lasdrop's sizes and here for Lasdrop's Installation Instructions.
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
|
STEEL KING Boltless Pallet Racks
USD 208.00 Designed to be substantially more durable than other pallet rack, STEEL KING Boltless Pallet Rack has heavy horizontal 1x2" steel tube braces that improve safety and resist damage reducing replacement and repair costs.All-tubular, continuous-welded upright frames offer 44 times more torsional strength. Heavy horizontal 1x2" steel tube braces improve safety and resist damage reducing replacement and repair costs. Boltless three-rivet beam connection is 26% stronger than two-rivet connections. Teardrop connector holes allow easy secure assembly while the safety lock engages automatically for quick installation. Heavy 10-ga. foot pad with multiple offset anchor holes. All capacities meet RMI specifications. Tough powder coat finish.NOTE: to build pallet rack you must order both upright frames and solid beams. Add skid supports, spacers, and frame protectors as needed. Call for assistance.
Notes : Stock Status : in-stock
|
|||
|
Volleyball Equipment Cart
USD 599.99 Heavy-duty steel tube construction cart stores up to eight volleyball standards plus nets and padding. Easy to maneuver, rides on non-marring swivel casters. 600 lb. capacity. 40"H x 34"W x 48"LUnique-Sports has been a trusted resource for volleyball equipment, equipment carts, and sporting goods for over 13 years. The Unique-Sports team is comprised of former athletes, current coaches, and sports enthusiasts that have hands on experience in the use and benefit of the products we sell. If you have any questions about this volleyball cart, please do not hesitate to contact us at 1-800-297-0747. A member of the Unique-Sports team will be happy to discuss this volleyball equipment cart (or any product or line you are interested in), help you customize a solution for your exact needs, or make equipment recommendations based on intended use. We have the lowest prices on-line…guaranteed!Our prices, selection, and quality are ...
Notes : Free Shipping Stock Status : in-stock
|
|||
|
Lasdrop Shaft Seals 1 1/2" Gen Ii Shaft Seals Seal, 1/2", Stern Tube: 3/4"
USD 409.99 Lasdrop Shaft Seals 1 1/2" Gen Ii Seal, 1/2", Stern Tube: 3/4" . The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. The Gen II uses a 316-marine grade stainless steel spring to provide pressure to the seal surfaces. Together, the spring and seal ring rotate along with the shaft, and remain secured in the Clamp/Pressure housing. Because there's virtually no metal-to-metal contact, you eliminate the risk of electrolysis. The Gen II is available for shaft sizes 1" 4," accommodating stern tube sizes of up to 8" OD. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews. The 316 stainless steel seal ring floats on a ball bearing drive system, maintaining complete contact with the carbon graphite seal surface. Solid brass hose barbs. AWAB hose clamps are 316 stainless steel, manufactured with indentations rather than perforations, providing twice the tensile strength and eliminating friction as in regular clamps. Click here for a list of Lasdrop's sizes and here for Lasdrop's Installation Instructions.
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
|
Lasdrop Shaft Seals 1 3/8" Gen Ii Shaft Seals Seal, Stern Tube: 2 1/2"
USD 369.99 Lasdrop Shaft Seals 1 3/8" Gen Ii Seal, Stern Tube: 2 1/2" . The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. The Gen II uses a 316-marine grade stainless steel spring to provide pressure to the seal surfaces. Together, the spring and seal ring rotate along with the shaft, and remain secured in the Clamp/Pressure housing. Because there's virtually no metal-to-metal contact, you eliminate the risk of electrolysis. The Gen II is available for shaft sizes 1" 4," accommodating stern tube sizes of up to 8" OD. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews. The 316 stainless steel seal ring floats on a ball bearing drive system, maintaining complete contact with the carbon graphite seal surface. Solid brass hose barbs. AWAB hose clamps are 316 stainless steel, manufactured with indentations rather than perforations, providing twice the tensile strength and eliminating friction as in regular clamps. Click here for a list of Lasdrop's sizes and here for Lasdrop's Installation Instructions.
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
|
Lasdrop Shaft Seals 1 3/4" Gen Ii Shaft Seals Seal, Stern Tube:
USD 494.99 Lasdrop Shaft Seals 1 3/4" Gen Ii Seal, Stern Tube: . The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. The Gen II uses a 316-marine grade stainless steel spring to provide pressure to the seal surfaces. Together, the spring and seal ring rotate along with the shaft, and remain secured in the Clamp/Pressure housing. Because there's virtually no metal-to-metal contact, you eliminate the risk of electrolysis. The Gen II is available for shaft sizes 1" 4," accommodating stern tube sizes of up to 8" OD. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews. The 316 stainless steel seal ring floats on a ball bearing drive system, maintaining complete contact with the carbon graphite seal surface. Solid brass hose barbs. AWAB hose clamps are 316 stainless steel, manufactured with indentations rather than perforations, providing twice the tensile strength and eliminating friction as in regular clamps. Click here for a list of Lasdrop's sizes and here for Lasdrop's Installation Instructions.
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
|
Lasdrop Shaft Seals 1 1/2" Gen Ii Shaft Seals Seal, 1/2", Stern Tube: 1/4"
USD 409.99 Lasdrop Shaft Seals 1 1/2" Gen Ii Seal, 1/2", Stern Tube: 1/4" . The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. The Gen II uses a 316-marine grade stainless steel spring to provide pressure to the seal surfaces. Together, the spring and seal ring rotate along with the shaft, and remain secured in the Clamp/Pressure housing. Because there's virtually no metal-to-metal contact, you eliminate the risk of electrolysis. The Gen II is available for shaft sizes 1" 4," accommodating stern tube sizes of up to 8" OD. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews. The 316 stainless steel seal ring floats on a ball bearing drive system, maintaining complete contact with the carbon graphite seal surface. Solid brass hose barbs. AWAB hose clamps are 316 stainless steel, manufactured with indentations rather than perforations, providing twice the tensile strength and eliminating friction as in regular clamps. Click here for a list of Lasdrop's sizes and here for Lasdrop's Installation Instructions.
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
|
STEEL KING Boltless Pallet Racks
USD 163.00 Designed to be substantially more durable than other pallet rack, STEEL KING Boltless Pallet Rack has heavy horizontal 1x2" steel tube braces that improve safety and resist damage reducing replacement and repair costs.All-tubular, continuous-welded upright frames offer 44 times more torsional strength. Heavy horizontal 1x2" steel tube braces improve safety and resist damage reducing replacement and repair costs. Boltless three-rivet beam connection is 26% stronger than two-rivet connections. Teardrop connector holes allow easy secure assembly while the safety lock engages automatically for quick installation. Heavy 10-ga. foot pad with multiple offset anchor holes. All capacities meet RMI specifications. Tough powder coat finish.NOTE: to build pallet rack you must order both upright frames and solid beams. Add skid supports, spacers, and frame protectors as needed. Call for assistance.
Notes : Stock Status : in-stock
|
|||
|
Lasdrop Shaft Seals 3 3/4" Gen Ii Shaft Seals Seal, Stern Tube: 6"
USD 1969.00 Lasdrop Shaft Seals 3 3/4" Gen Ii Seal, Stern Tube: 6" . The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. The Gen II uses a 316-marine grade stainless steel spring to provide pressure to the seal surfaces. Together, the spring and seal ring rotate along with the shaft, and remain secured in the Clamp/Pressure housing. Because there's virtually no metal-to-metal contact, you eliminate the risk of electrolysis. The Gen II is available for shaft sizes 1" 4," accommodating stern tube sizes of up to 8" OD. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews. The 316 stainless steel seal ring floats on a ball bearing drive system, maintaining complete contact with the carbon graphite seal surface. Solid brass hose barbs. AWAB hose clamps are 316 stainless steel, manufactured with indentations rather than perforations, providing twice the tensile strength and eliminating friction as in regular clamps. Click here for a list of Lasdrop's sizes and here for Lasdrop's Installation Instructions.
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
|
Lasdrop Shaft Seals 2 1/2" Gen Ii Shaft Seals Seal, Stern Tube: 4
USD 689.00 Lasdrop Shaft Seals 2 1/2" Gen Ii Seal, Stern Tube: 4 . The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. The Gen II uses a 316-marine grade stainless steel spring to provide pressure to the seal surfaces. Together, the spring and seal ring rotate along with the shaft, and remain secured in the Clamp/Pressure housing. Because there's virtually no metal-to-metal contact, you eliminate the risk of electrolysis. The Gen II is available for shaft sizes 1" 4," accommodating stern tube sizes of up to 8" OD. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews. The 316 stainless steel seal ring floats on a ball bearing drive system, maintaining complete contact with the carbon graphite seal surface. Solid brass hose barbs. AWAB hose clamps are 316 stainless steel, manufactured with indentations rather than perforations, providing twice the tensile strength and eliminating friction as in regular clamps. Click here for a list of Lasdrop's sizes and here for Lasdrop's Installation Instructions.
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
|
Lasdrop Shaft Seals 1 3/8" Gen Ii Shaft Seals Seal, Stern Tube: 3"
USD 409.99 Lasdrop Shaft Seals 1 3/8" Gen Ii Seal, Stern Tube: 3" . The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. The Gen II uses a 316-marine grade stainless steel spring to provide pressure to the seal surfaces. Together, the spring and seal ring rotate along with the shaft, and remain secured in the Clamp/Pressure housing. Because there's virtually no metal-to-metal contact, you eliminate the risk of electrolysis. The Gen II is available for shaft sizes 1" 4," accommodating stern tube sizes of up to 8" OD. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews. The 316 stainless steel seal ring floats on a ball bearing drive system, maintaining complete contact with the carbon graphite seal surface. Solid brass hose barbs. AWAB hose clamps are 316 stainless steel, manufactured with indentations rather than perforations, providing twice the tensile strength and eliminating friction as in regular clamps. Click here for a list of Lasdrop's sizes and here for Lasdrop's Installation Instructions.
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
|
Lasdrop Shaft Seals 2 3/4" Gen Ii Shaft Seals Seal, Stern Tube:
USD 799.00 Lasdrop Shaft Seals 2 3/4" Gen Ii Seal, Stern Tube: . The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. The Gen II uses a 316-marine grade stainless steel spring to provide pressure to the seal surfaces. Together, the spring and seal ring rotate along with the shaft, and remain secured in the Clamp/Pressure housing. Because there's virtually no metal-to-metal contact, you eliminate the risk of electrolysis. The Gen II is available for shaft sizes 1" 4," accommodating stern tube sizes of up to 8" OD. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews. The 316 stainless steel seal ring floats on a ball bearing drive system, maintaining complete contact with the carbon graphite seal surface. Solid brass hose barbs. AWAB hose clamps are 316 stainless steel, manufactured with indentations rather than perforations, providing twice the tensile strength and eliminating friction as in regular clamps. Click here for a list of Lasdrop's sizes and here for Lasdrop's Installation Instructions.
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
|
Lasdrop Shaft Seals 1 1/4" Gen Ii Shaft Seals Seal, Stern Tube: 3 1/2"
USD 389.99 Lasdrop Shaft Seals 1 1/4" Gen Ii Seal, Stern Tube: 3 1/2" . The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. The Gen II uses a 316-marine grade stainless steel spring to provide pressure to the seal surfaces. Together, the spring and seal ring rotate along with the shaft, and remain secured in the Clamp/Pressure housing. Because there's virtually no metal-to-metal contact, you eliminate the risk of electrolysis. The Gen II is available for shaft sizes 1" 4," accommodating stern tube sizes of up to 8" OD. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews. The 316 stainless steel seal ring floats on a ball bearing drive system, maintaining complete contact with the carbon graphite seal surface. Solid brass hose barbs. AWAB hose clamps are 316 stainless steel, manufactured with indentations rather than perforations, providing twice the tensile strength and eliminating friction as in regular clamps. Click here for a list of Lasdrop's sizes and here for Lasdrop's Installation Instructions.
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
|
STEEL KING Boltless Pallet Racks
USD 141.00 Designed to be substantially more durable than other pallet rack, STEEL KING Boltless Pallet Rack has heavy horizontal 1x2" steel tube braces that improve safety and resist damage reducing replacement and repair costs.All-tubular, continuous-welded upright frames offer 44 times more torsional strength. Heavy horizontal 1x2" steel tube braces improve safety and resist damage reducing replacement and repair costs. Boltless three-rivet beam connection is 26% stronger than two-rivet connections. Teardrop connector holes allow easy secure assembly while the safety lock engages automatically for quick installation. Heavy 10-ga. foot pad with multiple offset anchor holes. All capacities meet RMI specifications. Tough powder coat finish.NOTE: to build pallet rack you must order both upright frames and solid beams. Add skid supports, spacers, and frame protectors as needed. Call for assistance.
Notes : Stock Status : in-stock
|
|||
Steel Tube in what way to remove rust in the building good?
I want to rust can be removed to use my bathroom, curtains for I am the owner of a paper tube and the outer steel tube of sand in the building. Tube, but how do I remove rust from the inside of the tube of the building? Like a 6-foot-long tube, is one inch in diameter.
My shop is I "always works for anything rusty, but snow and lungs Watch out, public works and a good conditioner to use it "is used.
Carbon steel tube mill & end facing machine
(WWE) CZW Tournament Of Death 9 Results Inside Here
The show opened with a ten bell salute for former CZW star Michael "Trent Acid" Verdi. I believe DJ Hyde made a speech about Verdi, but I hadn't arrived yet due to traffic issues, so I'm not sure what was said.
Comments (0)
Trackbacks (0) ( subscribe to comments on this post )
No comments yet.
Leave a comment
No trackbacks yet.
